DESCRIPTION
Forcechem® Chemical Anchor, is a two-component, thixotropic, epoxy acrylate based anchor and mounting material with a cartridge.
APPLICATION AREAS
It is used in the anchoring of accessories and connecting rods to concrete, hollow and solid masonry etc., in repairs, metal ore plantation, anchoring the prefabricated elements, fixing the injection parkers and apparatus, anchoring bolts and pins, the assembly of pipes and installation such as central heating and ventilation, and for bonding all types of construction materials.
USAGE METHOD
The hole with the required diameter and depth is drilled with the hammer drill. The whole diameter and depth should be based on the size of the element to be anchored. The drilled hole must be cleaned with a round wire brush and compressed air. No dust, dirt, oil, etc. should be left in the holes. After each cleaning step, the hole should be cleaned with a pump and compressor starting from the bottom of the hole. The trigger is pulled until the two separate components inside the cartridge come out of the end of the static mixer as mixed. While putting the resin inside the whole starting from the bottom, slowly pull the cartridge out. Make sure to remove the air inside. An extension end can be used in deep holes. Rotate and insert the anchor element. After some resin comes out, the anchor must be placed in the hole within the gelling time of the resin. During the hardening time the anchor must not be moved or loaded.
TECHNICAL SPECIFICATIONS
Mixing Ratio | 87/13 |
Mixture Density | 1,70 + kg/lt |
Full Curing | 7 days |
Packing | 300 mL, 345 mL, 410 mL cartridge |
Quantity in the box (Number) | 12 |
Quantity in Parcel (Piece) | 60 |