ROTATING CHEMICAL GLASS ANCHOR

ROTATING CHEMICAL GLASS ANCHOR

DESCRIPTION

Forcechem® Rotating Chemical Glass Anchor is a connector used in conjunction with construction steel from M8 up to M’30 and most appropriately C 15 and C 25 -C 50 concrete. In these connections, Rotating Chemical Glass Anchor that is broken in the hole winds the stud and the stud does not contact the concrete, thus endurance is extended.

APPLICATION AREAS

Galvanized studs;

• Are used in apartment houses, offices, schools, hospitals, shopping malls etc. Except for humid locations.

Stainless steel studs;

• Can be used in apartment houses, offices, schools, hospitals, shopping centres, close to the sea water and moist places, swimming pools and business centres. It should not directly contact the seawater.

USAGE METHOD

The appropriate holes for the chemical anchor are drilled down. If two anchors are to be used, the depth of the hole should be adjusted accordingly. The hole must be thoroughly cleaned. The cleaner the hole is, the more endurance increases. When you hold Forcechem® Rotating Chemical Glass Anchor in hand, it must flow like honey within the glass due to the temperature of the hand. The resin and glass capsule containing quartz sand to be applied are fixed to the connection hole. When the stud is situated into the same hole by winding with the drill, glass capsule breaks in the hole. When chemicals start to come out of the edges, the drill should stop. If not, the chemicals will flow out. When anchoring is applied according to the dimensions on the table, the gap between the hole and the stud must be fully filled with chemicals. If the chemicals do not come out of top edge after the placement of studs, it should be immediately removed and the process must be repeated using a new Forcechem® Rotating Chemical Glass Anchor. For the roof and side use, precautions should be taken to ensure that the material in the capsule does not flow out.

APPLICATION EQUIPMENT

Hammer, Hammer Drill + Forcechem® Rotating Chemical Glass Anchor + Stud + Nut + Bolt

TECHNICAL SPECIFICATIONS